Disc brake dust.

Ask the questions and get the details in this board.
Post Reply
cecil misner
Master BucketHead
Master BucketHead
Posts: 443
Joined: Fri Jul 06, 2012 7:29 pm
Handle: ceec

Disc brake dust.

Post by cecil misner »

Before I drove to Tennessee, I had the brakes done on my Chevy pickup. They work fine but the calipers and pads (fronts) produce a huge amount of brake dust. Looks like hell, especially on a mag wheel. Fat Pat, what is the deal?

Ceec
It's not a toy if it takes two people to lift it.
Al Husa
Senior BucketHead
Senior BucketHead
Posts: 84
Joined: Tue Jul 10, 2012 10:31 am
Handle: cornshuck

Re: Disc brake dust.

Post by Al Husa »

I am not Fat Pat but I have had the same problem on several cars---the problem - the cheap brake pads!!!! Switch to ceramics and Presto Zippo---the problem is not gone but it is MUCH reduced!!!!!!!

Am I right FP?
cecil misner
Master BucketHead
Master BucketHead
Posts: 443
Joined: Fri Jul 06, 2012 7:29 pm
Handle: ceec

Re: Disc brake dust.

Post by cecil misner »

Thanks Cornshuck!! Never thought about poor quality pads. I figured they were all about the same.

CEEC
It's not a toy if it takes two people to lift it.
Kirk Jacobson
Baby BucketHead
Baby BucketHead
Posts: 5
Joined: Sat Oct 13, 2012 9:48 pm
Handle: osacr1955

Re: Disc brake dust.

Post by Kirk Jacobson »

Ford issued a technical service bulletin regarding "brake dust" on wheels a few years back. The tsb basically said that the dust on wheels was picked from the highway not from the pads. Static electricity was a partial blame for wheels collecting the dust. I was A Ford service manager for quite a few years and had a lot of customers concerned about the dust and wanted their brake linings checked for wear. I kept a copy of the TSB around to show the customers the reason for the dust. The difference of brake pad material may affect the amount of dust build up.
User avatar
Lugnut
Full Blown BucketHead
Full Blown BucketHead
Posts: 666
Joined: Tue Oct 16, 2012 1:26 pm
Handle: Charles

Re: Disc brake dust.

Post by Lugnut »

Kirk Jacobson wrote:Ford issued a technical service bulletin regarding "brake dust" on wheels a few years back. The tsb basically said that the dust on wheels was picked from the highway not from the pads. Static electricity was a partial blame for wheels collecting the dust. I was A Ford service manager for quite a few years and had a lot of customers concerned about the dust and wanted their brake linings checked for wear. I kept a copy of the TSB around to show the customers the reason for the dust. The difference of brake pad material may affect the amount of dust build up.
Kirk, while I'm NOT doubting your word, I too had the same issue with my '99 Ford F-150 and I switched to ceramic pads ( for when I towed an enclosed car trailer) and I've not had dirty wheels since doing that and I switched at least 12 years ago.

Lugnut
Post Reply

Return to “T-Bucket Technical Q & A”