tunnel ram throttle linkage

[Tom Cowart]

Does anyone have pictures of throttle linkage for a tunnel ram with dual quad 450 Holly carbs? they are mounted sideways with 1 to 1 linkage ( Edelbrock 7071) down to the manifold base. My problem is how do I attach the throttle cable.
I cannot find any cable brackets to mount on the manifold base. Everything I have found is designed for the carb base.
Thanks for the help.
Grumpy

[Lee in KC]

Would this work?

http://www.summitracing.com/parts/wnd-4027

[Tom Cowart]

I already have the side mount linkage installed and working well ( full action to the carb stops ) but no way to connect the throttle cable to the linkage.
This is on a 350 chevy motor.
Thanks
Grumpy

[Rolla Hessel]

Tom, you can look into a bell-crank set up since you are running them side saddle. You might need to fabricate a bracket to either mount on one of you intake bolts or even coming off the manifold. Look at Speedway Motors in ther Sprint Car area. I am sure Jegs and summit both have them available too.

[Tom Cowart]

Thanks guys it looks like I may be fabricating my own. Sooooo close but still no cigar. Hope to make Pigeon Forge.
Grumpy