Electric shifter
-
winfield scott
- Full Blown BucketHead

- Posts: 1341
- Joined: Tue Jul 10, 2012 12:18 pm
- Handle: SS-T
Electric shifter
Any one have or heard of a push button electric shifter that would work with a TH400, Just doing a little brain storming while down here on the ice.
Thanks
Thanks
-
Harley Alcox
- Senior BucketHead

- Posts: 65
- Joined: Thu Jul 12, 2012 8:00 pm
- Handle: wedrvit
Re: Electric shifter
Try this CCI- creative controls or Arens
- potvinguy
- Baby BucketHead

- Posts: 7
- Joined: Sun Jan 27, 2013 6:57 pm
- Handle: PG
Re: Electric shifter
I have an electric shifter on my TH400. Built it myself. Glad to share details with you.
- Mike Blanche
- Master BucketHead

- Posts: 352
- Joined: Tue Jul 10, 2012 1:59 pm
- Handle: Tub T
- Lugnut
- Full Blown BucketHead

- Posts: 666
- Joined: Tue Oct 16, 2012 1:26 pm
- Handle: Charles
Re: Electric shifter
A couple years ago there was a company that offered an electronic shifter...price was holding me back...about $600.00; well that AND the fact that it was electronic. Rates right up there with the electric fuel pump in my opinion. If it goes out, you will be stuck where ever you are. When I had my first t-bucket, it came with an electric fuel pump...I went out the next day and bought a back-up just because I didn't want to get in the situation that I could not get back home.
Make mine mechanical thank you very much. I run a mechanical fuel pump and shifter. But THIS is only MY opinion and desire.
Lugnut
Make mine mechanical thank you very much. I run a mechanical fuel pump and shifter. But THIS is only MY opinion and desire.
Lugnut
- potvinguy
- Baby BucketHead

- Posts: 7
- Joined: Sun Jan 27, 2013 6:57 pm
- Handle: PG
Re: Electric shifter
Let's see if I can make this image thing work:
[img]https://picasaweb.google.com/1049712123 ... 3013706674[/img]
A linear actuator made by Firgelli moves the tranny shift arm. I made the arm from a piece of scrap aluminum, and bent a L bracket to mount the actuator to a tranny pan bolt. The actuator responds to a voltage to position it, so I made a little box with potentiometers for each gear, and a box with a selector knob for the dash. I'll make a drawing with more detail and post it. You can go to the Firgelli website for more info on their products. The whole thing cost about $150. If you have questions or need help building one, email me at dr.kerrysmith@gmail.com.
[img]https://picasaweb.google.com/1049712123 ... 3013706674[/img]
A linear actuator made by Firgelli moves the tranny shift arm. I made the arm from a piece of scrap aluminum, and bent a L bracket to mount the actuator to a tranny pan bolt. The actuator responds to a voltage to position it, so I made a little box with potentiometers for each gear, and a box with a selector knob for the dash. I'll make a drawing with more detail and post it. You can go to the Firgelli website for more info on their products. The whole thing cost about $150. If you have questions or need help building one, email me at dr.kerrysmith@gmail.com.
- potvinguy
- Baby BucketHead

- Posts: 7
- Joined: Sun Jan 27, 2013 6:57 pm
- Handle: PG
Re: Electric shifter
OK, I don't know how to make a pic appear. But I'll get there.
- Bob Lemke
- Full Blown BucketHead

- Posts: 777
- Joined: Tue Jul 10, 2012 10:59 am
- Handle: deckofficer
- Location: Northern & Southern California
- Contact:
- potvinguy
- Baby BucketHead

- Posts: 7
- Joined: Sun Jan 27, 2013 6:57 pm
- Handle: PG
Re: Electric shifter
Thanks, Bob! Maybe I can't use Picasa pics, or maybe I need permission to use BBCode. New to the forum!
- Bob Lemke
- Full Blown BucketHead

- Posts: 777
- Joined: Tue Jul 10, 2012 10:59 am
- Handle: deckofficer
- Location: Northern & Southern California
- Contact:
Re: Electric shifter
Does Picasa have img code for your pictures? If so, use that code.potvinguy wrote:Thanks, Bob! Maybe I can't use Picasa pics, or maybe I need permission to use BBCode. New to the forum!
Bob



