Battery cable size
-
Bill Salser
- Junior BucketHead

- Posts: 23
- Joined: Tue Jul 10, 2012 5:42 pm
- Handle: sal-t
Battery cable size
Is #2 AWG welding cable large enough for a T-bucket.
- Indycars
- Full Blown BucketHead

- Posts: 762
- Joined: Wed Nov 27, 2013 6:01 pm
- Handle: Indycars
Re: Battery cable size
.
Should be, but it all depends on the electrical loads you have and how long the cable must be. When using the table below (2nd graphic), be sure to consider the total length including the ground side. See note at top.
.
Add up all your loads using the list below if you don't know how many amps your specific device requires, then go to the second graphic to see what gauge wire you need.
. .
Should be, but it all depends on the electrical loads you have and how long the cable must be. When using the table below (2nd graphic), be sure to consider the total length including the ground side. See note at top.
.
Add up all your loads using the list below if you don't know how many amps your specific device requires, then go to the second graphic to see what gauge wire you need.
. .
Rick
Oklahoma
Too Much Is Just Enough !!!
Oklahoma
Too Much Is Just Enough !!!
-
Bill Salser
- Junior BucketHead

- Posts: 23
- Joined: Tue Jul 10, 2012 5:42 pm
- Handle: sal-t
Re: Battery cable size
Thanks Indycars the charts help a lot. Looks like about 65 amps total with a length of wire at around 12 feet.
- Indycars
- Full Blown BucketHead

- Posts: 762
- Joined: Wed Nov 27, 2013 6:01 pm
- Handle: Indycars
Re: Battery cable size
You're welcome, glad it was helpful !
Rick
Oklahoma
Too Much Is Just Enough !!!
Oklahoma
Too Much Is Just Enough !!!