ON the demand photos new thread!

[mike wade]

Bill I never caught up with the driver of that car to inquire about that. Maybe Uncle did???

Here a few photos of the west side of the mountains taken by Karen Handsaker.......Thank you.. .It also shows how Lynn get windswept........... .......I stold these from FB.....

14907177_10202207475463885_2443231066971761476_n.jpg (72.39 KiB) Viewed 1425 times

14908216_10202207467743692_124573038522520896_n.jpg (55.53 KiB) Viewed 1425 times

14910488_10202207468343707_2552179983671801119_n.jpg (104.83 KiB) Viewed 1425 times

14925302_10202207469263730_3151736184750561417_n.jpg (91.2 KiB) Viewed 1425 times

14937294_10202207471543787_6519631935659085435_n.jpg (43.17 KiB) Viewed 1425 times

[mike wade]

14915707_1445696085459528_7314919108765941756_n.jpg (107.48 KiB) Viewed 1425 times

14962594_10202207471783793_6330147694695621167_n.jpg (103.57 KiB) Viewed 1425 times

14962643_10207872312629218_5186879428480801383_n.jpg (69.98 KiB) Viewed 1425 times

14991808_10202207473703841_4273975690599744523_n.jpg (113.77 KiB) Viewed 1425 times

14992035_10202207470423759_8982923177306511235_n.jpg (55.35 KiB) Viewed 1425 times

Damn Yellow car again in front of Sir Vezas at the show & shine.......
Out of about 500 miles this weekend and 44 cars only one had to ride back.....

Thanks to Eddies Towing and the driver (Gordon) for being the shag wagon this week.......

New Thread starts tomorrow cause this one is getting to long for the Uncle............

Mike

[Indycars]

Since the mufflers are in a Parallel configuration, that would reduce back
pressure in the exhaust. Would be good for increasing HP.

[Bill Cleveland]

Since the mufflers are in a Parallel configuration, that would reduce back
pressure in the exhaust. Would be good for increasing HP.

But . . . better than a single outlet of larger diameter?

[Indycars]

Since the mufflers are in a Parallel configuration, that would reduce back
pressure in the exhaust. Would be good for increasing HP.

But . . . better than a single outlet of larger diameter?

Well it depends of what diameters you are speaking of..... but ......

Lets work with an example of and two - 2" diameter mufflers or increasing from a 2" to a 2.5" diameter.

Area of a Circle = Pi x Radius squared.

2 Inch Muffler
Area = Pi (2/2)sq
Area = 3.14(1.00)sq = 3.14 sq inches

2.5 Inch Muffler
Area = Pi (2.5/2)sq
Area = 3.14(1.25)sq = 4.91 sq inches

Two 2" Mufflers
3.14 x2 = 6.28 sq inches

(((6.28-4.91) / 4.91))100 = 27.9% Increase in Flow Area

Two beers and math don't mix, so please check my math.
.

[Bill Cleveland]

Or . . . one 3 " muffler: 3.14 x 2.25 = 7.065 sq in
(Did we just hijack this thread??? )

[Indycars]

Sounds like you knew how calculate the answer with the appropriate parameters..... are you giving me a HARD TIME ???

[mike wade]

Bill it is real hard to hijack a thread that was already given up for dead..............lol.......

I really think you are both wrong you should have carried the two and divided by the four then subtracted the 1 and the multiplied by 5..............See how easy that was..........

[Bill Cleveland]

Sounds like you knew how calculate the answer with the appropriate parameters..... are you giving me a HARD TIME ???

I would never do that, Rick!

[Indycars]

Okie Dokie!