How to figure back space?

[frank_a]

So with tires 10 and 1/2 inches wide, that will add about 1 and 1/4 inch to each side, or 2 and 1/2 altogether.

The little woman said I could go ahead and order wheels and tires today.

Hmm.

[frank_a]

This was my old hot rod with 15 X 15 wheels. I'm almost sure they were 5.5 inch back space, but I sold them a long time ago, so no clue.

[frank_a]

Another view

[dezolde]

So with tires 10 and 1/2 inches wide, that will add about 1 and 1/4 inch to each side, or 2 and 1/2 altogether.

The little woman said I could go ahead and order wheels and tires today.

Hmm.

Yes, when you add tire cross section. You could also consider using 5.0" BS which provides a little more rim/tire clearance at the bottom plus allows a bit more for the wheels to swing inward at the top as the suspension compresses.

Jerry

[Bruce Pickett]

One inch of clearance would be enough, but more would be better.

Other than special made wheels, back spacing is almost a set in stone choice in wheel selection.

[Bruce Pickett]

Screenshot-2019-5-6 Understanding Wheel Offset and Backspacing.jpg (58.41 KiB) Viewed 480 times